Sub categories

Online Shopping >> Item Details
Kingston 8GB (1x8GB) DDR4 SODIMM 2666MHz CL19 1.2V 1Rx8 Unbuffered ValueRAM Notebook Laptop Memory ~KVR26S19S6/8
Kingston 8GB (1x8GB) DDR4 SODIMM 2666MHz CL19 1.2V Unbuffered ValueRAM Single Stick Notebook Laptop Memory


This document describes ValueRAM's KVR26S19S8/8 is a 1G x 64-bit (8GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx8, non-ECC, memory module, based on eight 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. This 260-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:

Read More

A$46.81

Add to Cart



Item Code:990868

Item Type:Brand New With Warranty.

Award Points:93

No Of Items:1

Item Volume:0.02 litre

Gross Weight:0.02 kg

Item Volume:6.8 x 3.6 x 0.8 cm

Item Location:Sydney

Item Description

Kingston 8GB (1x8GB) DDR4 SODIMM 2666MHz CL19 1.2V Unbuffered ValueRAM Single Stick Notebook Laptop Memory


This document describes ValueRAM's KVR26S19S8/8 is a 1G x 64-bit (8GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx8, non-ECC, memory module, based on eight 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. This 260-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:




• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
• Low-power auto self refresh (LPASR)
• Data bus inversion (DBI) for data bus
• On-die VREFDQ generation and calibration
• Single-rank
• On-board I2 serial presence-detect (SPD) EEPROM
• 16 internal banks; 4 groups of 4 banks each
• Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF)
• Fly-by topology
• Terminated control command and address bus
• PCB: Height 1.18' (30.00mm)
• RoHS Compliant and Halogen-Free


Return Policy:

1. Before returning any item you must contact us, otherwise it will be sent back to the customer at their expense.

2. 15% restocking fee will apply, unless otherwise advised(min. restocking charge of 10ex)

3. Clients canceling orders after goods have been delivered will incur a handle fee. Such fee shall be at the sole discretion of tradecenter.com.au.

4. Credits will not be given for returns on stock older than 7 days of invoice date, due to the high volatility of IT products.

 


Item Supplier Terms & Conditions:

Item Supplier Terms & Conditions


Warranty Information :

All products are sold with manufacturer warranty.