Sub categories

Online Shopping >> Item Details
Kingston 8GB (1x8GB) DDR4 SODIMM 2666MHz CL19 1.2V 1Rx16 Unbuffered ValueRAM Notebook Laptop Memory
Kingston 8GB (1Rx8GB) DDR4 SODIMM 2666MHz CL19 1.2V Unbuffered ValueRAM Notebook Laptop Memory


This document describes ValueRAM's KVR26S19S8/8 is a 1G x 64-bit (8GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx8, non-ECC, memory module, based on eight 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. This 260-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:

Read More

A$46.81

Add to Cart



Item Code:990101

Item Type:Brand New With Warranty.

Award Points:93

No Of Items:2

Item Volume:0.022 litre

Gross Weight:0.03 kg

Item Volume:4.0 x 6.8 x 0.8 cm

Item Location:Sydney

Item Description

Kingston 8GB (1Rx8GB) DDR4 SODIMM 2666MHz CL19 1.2V Unbuffered ValueRAM Notebook Laptop Memory


This document describes ValueRAM's KVR26S19S8/8 is a 1G x 64-bit (8GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx8, non-ECC, memory module, based on eight 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. This 260-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:


• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
• Low-power auto self refresh (LPASR)
• Data bus inversion (DBI) for data bus
• On-die VREFDQ generation and calibration
• Single-rank
• On-board I2 serial presence-detect (SPD) EEPROM
• 16 internal banks; 4 groups of 4 banks each
• Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF)
• Fly-by topology
• Terminated control command and address bus
• PCB: Height 1.18' (30.00mm)
• RoHS Compliant and Halogen-Free


Return Policy:

1. Before returning any item you must contact us, otherwise it will be sent back to the customer at their expense.

2. 15% restocking fee will apply, unless otherwise advised(min. restocking charge of 10ex)

3. Clients canceling orders after goods have been delivered will incur a handle fee. Such fee shall be at the sole discretion of tradecenter.com.au.

4. Credits will not be given for returns on stock older than 7 days of invoice date, due to the high volatility of IT products.

 


Item Supplier Terms & Conditions:

Item Supplier Terms & Conditions


Warranty Information :

All products are sold with manufacturer warranty.